Supplier Insurance Requirements for Manufacturers

Nov 19, 2026

Read any certificate of insurance in seconds. Upload an ACORD 25 and the AI pulls the insurer, policy numbers, limits, dates and endorsement status into structured data.

PDF, JPG, PNG, BMP, HEIC, TIFF

Upload your certificates of insurance

No certificate on hand? Loading the sample certificate...

A manufacturer should require a certificate of insurance from every supplier and every outside contractor before the first purchase order ships or the first crew badges in, with the manufacturer's exact legal entity named as certificate holder and additional insured. Most US plants ask component suppliers for general liability of $1,000,000 each occurrence with a $2,000,000 products and completed operations aggregate and a vendors endorsement, and ask on-site contractors for workers comp, employer liability, auto and a waiver of subrogation.

That is the policy in two sentences. The work is in setting different rules for different supplier types, reading the right line on each certificate, and catching renewals across a few hundred suppliers. Below is the requirement table we would put in a supplier agreement, the lines on the ACORD 25 that matter for a plant, a worked check of three real-shaped certificates, and the point where a spreadsheet stops being enough. If you want to skip ahead, our supplier compliance software for manufacturers checks a certificate against these rules in under a minute.

What insurance should a manufacturer require from suppliers?

Split suppliers by what they do to you, not by how much you spend with them. A supplier that ships a part into your product creates products liability exposure. A contractor who works on your floor creates injury and property exposure. A carrier moving your finished goods creates cargo exposure. One checklist for all three lets the risky certificate pass on a line that does not matter for that supplier.

Supplier typeRequireLine to read on the certificate
Component and raw material suppliersGeneral liability $1,000,000 each occurrence, $2,000,000 products and completed operations aggregate, vendors endorsement naming you, umbrella for safety-critical partsProducts-comp/op agg, not just general aggregate
Contract manufacturers and co-packersProducts liability at the same or higher limits, vendors endorsement, product recall if your own customer requires it of youAdditional insured column plus the attached endorsement page
On-site maintenance and shutdown contractorsGeneral liability, workers comp at statutory limits, employer liability $1,000,000, auto, additional insured with waiver of subrogationWorkers comp policy dates and the waiver column
Staffing agenciesWorkers comp, employer liability, general liability, alternate employer endorsementDescription of operations, where the alternate employer wording usually appears
Freight carriersAuto liability, cargo at least equal to the value of a full load, general liability for dock workCargo line, often in the "other" row
Waste and environmental contractorsPollution liability, auto, general liability, workers compA separate pollution policy, since general liability usually excludes it

These are common starting points, not legal or insurance advice. Your contracts, your insurer and your largest customers set the final numbers. Many automotive, food and retail buyers push their own supplier insurance terms down to you, and the cleanest way to meet them is to require the same of your own supply chain.

Why the products and completed operations aggregate matters most

The ACORD 25 shows two aggregates under commercial general liability: the general aggregate and the products and completed operations aggregate. A supplier can carry $2,000,000 general aggregate and only $1,000,000 for products. When a part fails in the field, the products aggregate is the one that pays. It is also the line purchasing teams skip, because the each occurrence figure at the top of the box looks fine.

The second trap is the additional insured box. A tick in the ADDL INSD column says the supplier's agent believes an endorsement exists. It does not tell you which one. For a supplier, the form you want is the vendors endorsement (ISO CG 20 15), which extends the supplier's products coverage to you as the seller of its product. For a contractor, it is an ongoing and completed operations endorsement such as the CG 20 10 additional insured endorsement. ACORD itself prints a disclaimer on the form saying the certificate confers no rights, which is why the ACORD forms are evidence of coverage, not coverage. Our longer guide to certificate of insurance requirements for vendors walks through the vendors endorsement wording line by line.

What should plant contractors carry before they badge in?

Contractors are where plants get hurt most often, literally. OSHA's multi-employer citation policy lets an inspector cite the host employer that controls a worksite, not only the contractor whose worker was exposed. Insurance does not fix a citation, but it decides who pays for the injury that follows.

For millwrights, electricians, riggers, HVAC techs and shutdown crews, check four things on every visit, not just the first:

  • Workers comp is a real policy with dates that cover the job, not a sole proprietor exemption letter for a crew of six.
  • Employer liability is shown, usually $1,000,000 each accident.
  • Your entity is additional insured on general liability, with a waiver of subrogation on comp and general liability if your contract asks for it.
  • Auto is on the certificate if the contractor drives service trucks onto your property.

Insurance is one of three gates at the badge office, next to site safety training and the fitness-for-duty check. Plants that run reasonable-suspicion alcohol testing for contractors usually pick a device first, and independent breathalyzer reviews and rankings are a quick way to compare models. The insurance gate is the one that can be automated end to end, which is what our page on contractor insurance verification software covers in detail.

A worked check of three supplier certificates

Here is what a real review looks like at a mid-size metal parts plant. The requirement set is the table above. The three certificates are typical of what arrives in a normal week.

CertificateWhat it showsRequirementResult
Bracket supplier (machined steel brackets)GL $1,000,000 each occurrence, $2,000,000 general aggregate, $1,000,000 products-comp/op aggregate, ADDL INSD ticked, no endorsement attached$2,000,000 products aggregate, vendors endorsementFail on two lines: products aggregate $1,000,000 short, endorsement not evidenced
Millwright contractor (spring shutdown)GL and auto current to January, workers comp policy ends March 31, shutdown starts April 14Workers comp current on every work dayFail: comp expires two weeks before the job
Regional carrier (finished goods)Auto $1,000,000, cargo $100,000Cargo equal to a full load, which is about $180,000 of finished bracketsFail: cargo $80,000 short

Three certificates, three failures, and none of them would be caught by someone checking that a certificate exists and the each occurrence limit says $1,000,000. Each one becomes a short fix list for the supplier's agent: raise the products aggregate or add an umbrella, send the CG 20 15 page, send the renewed comp policy, raise cargo or schedule the high-value lanes.

Now scale it. Assume a plant with 180 active suppliers that need a certificate, 40 regular contractors and 8 carriers. That is 228 certificates a year at minimum, and contractors who return for two shutdowns and a renewal in between add another 40 or so checks. At an assumed 12 minutes per careful manual review, that is roughly 54 hours of reading a year, before any follow-up email, and it tends to land in the same weeks as shutdown planning and customer audits.

Spreadsheet, outsourced service or software?

A spreadsheet works for 30 suppliers and one person who reads every certificate properly. It fails quietly once renewal dates spread across the year, because the spreadsheet holds a date somebody typed, not the certificate that would prove it. Our comparison of a COI tracking spreadsheet versus software shows where that line usually falls.

Supplier and contractor prequalification networks do far more than insurance (safety records, questionnaires, training), and charge suppliers to join. If your customer requires one, use it. If the gap you actually have is uninsured suppliers and contractors, a COI tool closes it for much less effort on both sides.

Software earns its place when the plant has more than a few dozen suppliers, when contractors come back repeatedly, or when a customer audit asks for proof. COISoftware reads each certificate, checks the products aggregate, workers comp dates, cargo and additional insured wording against rules per supplier type, and reminds you before a policy expires. Pro and Enterprise plans include an API, so certificates can be checked inside a supplier portal or ERP workflow.

Supplier insurance checklist for your agreement

  • Name your exact legal entity and address as certificate holder and additional insured, in the agreement itself.
  • State the products and completed operations aggregate separately from the general aggregate.
  • Ask for the endorsement page, not only the tick in the ADDL INSD column.
  • Require workers comp and employer liability from anyone who works on site, with dates that cover the work.
  • Set cargo at the value of a full load for each lane.
  • Require a new certificate at every renewal, and before every return visit by a contractor.
  • Keep a record of what you checked and when, for customer and insurer audits.

Write those seven lines into the agreement and you have a policy. To enforce it without adding hours to purchasing, upload a supplier certificate to the supplier compliance software page and see the pass or fix list it produces.

Stop tracking COIs by hand

COISoftware reads every certificate of insurance, checks coverage and endorsements against your requirements, and flags expirations automatically. Test it on your own certificate, no account needed.