Contractor Insurance Verification Software for Property Managers and GCs

Upload a certificate of insurance below and see gaps, limits and expiration dates in seconds. No account needed.

PDF, JPG, PNG, BMP, HEIC, TIFF

Upload your certificates of insurance

No certificate on hand? Loading the sample certificate...

Free demo, no account needed. See plans and prices

Contractor insurance verification software checks every certificate a contractor sends you against the coverage you require, before the contractor is on site. COISoftware reads the ACORD 25, compares each limit, date and additional insured box with your rules, and tells you in plain words what is missing. Upload one contractor certificate above and see the check in under a minute.

Checks limits, dates and additional insured
Reads PDFs, scans and phone photos
Flags a gap before the job starts
Free 10-document demo

Verifying Contractor Insurance by Hand or with Software

The same five checks, done by a coordinator with a spreadsheet and by software reading the certificate.

Each occurrence and aggregate limits

COISoftware
Every limit read from the certificate and compared with your requirement automatically
By hand
Coordinator reads the coverage table and compares it with the contract

Policy dates

COISoftware
Effective and expiration dates read per coverage line, expiring policies flagged ahead of time
By hand
Expiration typed into a spreadsheet, renewal remembered by whoever owns the sheet

Additional insured and waiver boxes

COISoftware
Boxes read and endorsement pages attached to the certificate checked in the same pass
By hand
Checkbox read on the ACORD 25, endorsement pages often skipped

Certificate holder name

COISoftware
Compared with the exact entity name you require
By hand
Spotted only when someone looks closely

Proof for an audit or a claim

COISoftware
One record per contractor with the certificate, the result and the date it was checked
By hand
Email threads and a folder of PDFs

Software does not replace a call to the agent when a certificate looks altered. It makes sure that call happens for the right certificate instead of none of them.

Where Contractor Insurance Checks Break Down

Most uninsured contractors on a job site got there with a certificate on file. The certificate was simply never read properly.

The certificate is filed, not checked

A PDF lands in a shared inbox and gets saved to a folder. Nobody compares the $500,000 aggregate with the $2,000,000 your contract requires.

Coverage expires mid-job

A roofer starts in March with a policy that renews in May. If the renewal certificate never arrives, the second half of the job runs uninsured.

Additional insured is assumed

The AI box on the ACORD 25 is ticked, but without the endorsement the certificate itself confers no rights, as the form states in its own disclaimer.

Workers comp is missing for sole proprietors

Small contractors often carry general liability only. If an uninsured worker is hurt on your property, the claim can land on your policy.

Nobody can prove what was checked

After an incident, the insurer asks what you verified and when. A spreadsheet with a typed date is weak evidence.

The people searching for contractor insurance verification are rarely insurance specialists. They are property managers onboarding a new HVAC vendor, facility managers approving a landscaper, and project coordinators at general contractors collecting certificates from 30 trades before mobilization. Each of them has the same three questions about every contractor: is the coverage real, is it enough, and does it protect us. The certificate answers all three if someone reads it carefully, and that careful reading is exactly what slips when there are more contractors than hours in the week.

A state license lookup answers a different question. It confirms the contractor may legally do the work, and some states require proof of insurance to keep a license active, but the board does not check your contract limits or whether your company is named as additional insured. That check is yours, and it happens on the certificate.

What Contractor Insurance Verification Software Checks

The certificate is read, compared with your requirements and turned into a clear pass or a clear list of what to fix.

Reads the ACORD 25

Named insured, certificate holder, insurers, policy numbers, dates and every coverage line, from a PDF, a scan or a phone photo.

Limits against your rules

General liability, auto, umbrella and workers comp limits compared with what your contract or vendor policy requires.

Dates per coverage line

A certificate can carry one expired line among current ones. Each line is checked on its own, so the stale one does not hide.

Additional insured and waiver

The checkboxes and any endorsement pages sent with the certificate are read together, so a ticked box without wording is caught.

Expiration alerts

Policies that end during an active job are flagged ahead of time, so you request the renewal certificate before coverage lapses.

Export and audit trail

Every checked certificate stays on the contractor record and exports to Excel or CSV for an auditor, an owner or a lender.

If you mainly verify subcontractors on construction projects, the COI tracking for general contractors page covers project-level requirements and lower-tier subs. Property teams that onboard maintenance vendors across many buildings should read COI tracking for property management. The field-by-field logic of checking a single certificate is on the COI verification software page, and the endorsement side is covered by additional insured endorsement checks. To confirm that an insurer listed on a certificate is a licensed company, the NAIC company search is the public source most state regulators point to.

Why Choose COISoftware?

  • Checks done in seconds per certificate
  • Same rules applied to every contractor
  • Expired lines caught even on a current certificate
  • Endorsement pages read with the certificate
  • One record per contractor for audits
  • Built for US ACORD certificates

How to Verify a Contractor Certificate in Three Steps

From the certificate in your inbox to a pass or a fix list.

1

Set your contractor requirements

Enter the limits and conditions you need, for example $1,000,000 each occurrence, $2,000,000 aggregate, workers comp at statutory limits, and your company as additional insured.

Tip: Use one requirement set for small service vendors and a stricter one for trades working at height or with heavy equipment.

2

Upload the certificate

Drop in the PDF, scan or photo the contractor sent. The ACORD 25 and any endorsement pages are read in one pass.

3

Read the result and send the fix list

A compliant certificate is marked as passed. A failing one lists each gap in plain words, ready to forward to the contractor or their agent.

Who Verifies Contractor Insurance with COISoftware

Teams that hire outside contractors and carry the risk when one is underinsured.

Property managers verify the plumbers, electricians, roofers and cleaning crews that work in occupied buildings, where a single uninsured slip and fall can reach the owner. General contractors verify every trade before mobilization, because their own insurer audits subcontractor coverage at renewal and charges premium for uninsured subs. Facility and procurement teams at hospitals, schools and corporate campuses verify service vendors who come back every month, where the real risk is a renewal that never arrived.

A worked example shows why the reading matters. A landscaping vendor sends a certificate showing $1,000,000 each occurrence and $1,000,000 general aggregate, a ticked additional insured box, and no workers comp line. Your vendor policy asks for a $2,000,000 aggregate and workers comp. A quick glance says "insured". The check says three things fail: the aggregate is half of what you need, workers comp is missing, and the additional insured box has no endorsement behind it. That is the email you send before the mowers arrive, not after a claim.

Plans start at $24 a month billed yearly on Starter, with higher volumes on Plus and Pro; see pricing for the current limits.

Why Teams Pick COISoftware for Contractor Checks

1
Upload to a pass or a fix list
ACORD 25
Read field by field
10
Free demo documents

What you can count on

  • Encrypted storage of every certificate
  • Your contractor data is never sold or shared
  • Access limited to your team
  • Built for US ACORD certificates

Contractor Insurance Verification FAQ

Ask for a certificate of insurance naming your company as certificate holder, then check limits, policy dates, additional insured and workers comp against your requirements. For a doubtful certificate, call the producing agent listed on it. COISoftware does the certificate check automatically and lists every gap.

Yes, in two parts. Upload the contractor certificate to COISoftware to check coverage against your rules, and use your state licensing board or the NAIC company search to confirm the license and the insurer. No public database lists a contractor's private policy limits.

Most US property and construction contracts ask for general liability, commercial auto if vehicles come on site, workers compensation where the contractor has employees, and often umbrella coverage. The right limits depend on the work; set them once as a requirement set and every certificate is checked against it.

It is evidence that a policy existed when the certificate was issued, not a guarantee. The ACORD 25 says it confers no rights to the holder. That is why verification checks the dates, the limits and the endorsements behind the boxes rather than the fact that a certificate exists.

At onboarding, before each new project or contract, and again whenever a policy on file expires. Software tracks expiration dates per coverage line, so a renewal request goes out before the old policy ends instead of after an incident.

Yes. Upload a contractor certificate to the demo on this page with no account, and a free signup adds 10 demo documents. You see the real check on your own certificates before choosing a plan.