Construction Compliance Software That Checks Subcontractor Insurance
Read any certificate of insurance in seconds. Upload an ACORD 25 and the AI pulls the insurer, policy numbers, limits, dates and endorsement status into structured data.
PDF, JPG, PNG, BMP, HEIC, TIFF
Upload your certificates of insurance
Drop files here or click to upload
Up to 50 files
Uploading...
No certificate on hand? Loading the sample certificate...
Construction compliance software covers several separate jobs: safety inspections, certified payroll, licensing, permits and subcontractor insurance. Most tools in the category are strong on one or two of them and treat the certificate of insurance as a document upload with an expiration date. If uninsured or underinsured subs are your real exposure, check that the tool reads limits, endorsements and policy dates against each subcontract, or add a certificate check next to the system you already run.
That is the short answer. This article is for the general contractor, owner's rep or compliance manager shortlisting construction compliance software this quarter. It splits the category into the jobs it actually covers, shows on a worked project where certificates fail, and lists the questions that separate a real insurance check from a file cabinet. If you want to see a subcontractor certificate checked right now, upload one on the contractor compliance software page and you will have a pass or a fix list in under a minute.
What construction compliance software actually covers
The phrase is used for very different products. Comparison lists mix inspection apps, payroll reporting tools, project management suites and prequalification networks, because each of them does some compliance work. Before you compare vendors, decide which of these jobs you are buying for.
| Compliance job | What has to be true | Typical tool type | How deep the insurance check goes |
|---|---|---|---|
| Site safety and inspections | Daily checklists done, hazards closed, toolbox talks logged | Inspection and safety apps | None, insurance is outside scope |
| Certified payroll and prevailing wage | Weekly payroll reports filed on public work | Certified payroll software | None |
| Subcontractor prequalification | Financials, safety record, EMR and references reviewed before award | Prequalification software or networks | Usually a certificate upload during the questionnaire, sometimes a limit field |
| Project document control | Submittals, RFIs and commitments tracked per project | Construction management suites | Often an insurance record with an expiration date on the company profile |
| Subcontractor insurance | Every policy in force at the required limits, with the right endorsements, through project completion | COI tracking software | Each certificate read line by line and checked against the subcontract |
Public work adds its own layer. On federally funded jobs, prevailing wage and payroll reporting follow the Davis-Bacon rules the US Department of Labor publishes, and that is a payroll tool's job. Insurance is different: the rules come from your own subcontracts and your owner's contract, so no regulator checks them for you. If a sub is uninsured on the day of a loss, the claim lands on your policy and your loss history.
Where the certificate check falls through
Most construction compliance tools store a certificate. Few verify it. The difference shows up in four places on almost every project.
The additional insured tick without the endorsement
An ACORD 25 has a column marked ADDL INSD. A Y in that column tells you the agent says an endorsement exists. It does not tell you which form, whether it covers completed operations, or whether it names your company. A GC that needs both ongoing and completed operations coverage should be asking for the endorsement pages, which is why we keep a separate guide to additional insured endorsements.
One expiration date for four policies
A sub's general liability, auto, workers comp and umbrella often renew on different dates. A tool that stores one expiration per company will show the sub as current while the comp policy lapsed last month.
Coverage that ends before the job does
A policy that is valid at mobilization can still end three months before substantial completion. Unless the tool knows the date coverage is needed through, it cannot warn you.
Limits checked by eye
Requirements differ by trade. Your structural steel sub may need a $5M umbrella while the painter needs $1M. A shared requirement for every sub either blocks good painters or waves through an underinsured steel erector.
A worked project: 24 subcontractors on a mid-rise
Here is an illustration built from typical certificates, not data from a specific customer. A general contractor starts a 14-month, five-story mixed-use building with 24 subcontractors. The subcontract requires general liability of $1M per occurrence and $2M aggregate with a per-project aggregate, auto at $1M, workers comp at statutory limits, and an umbrella of $5M for structural, electrical, mechanical and roofing trades and $2M for everyone else. The GC and owner must be additional insured for ongoing and completed operations, with waiver of subrogation and primary and noncontributory wording.
At mobilization all 24 certificates arrive. A careful read gives this result:
| Result | Subs | What was wrong |
|---|---|---|
| Pass | 15 | Nothing |
| Completed operations missing | 3 | Additional insured endorsement attached, but for ongoing operations only |
| Umbrella too low | 2 | Electrical and roofing showed $2M against a $5M requirement |
| No per-project aggregate | 2 | Aggregate shared across every job the sub runs this year |
| Policy ends before the project | 1 | GL expires in month 7 of 14 with no renewal on file |
| Wrong named insured | 1 | Certificate issued to a related company, not the entity that signed the subcontract |
Nine of 24 need a corrected certificate before they start. Over 14 months, four policies per sub means close to 100 renewal dates, so the GC will see about 24 initial certificates, 9 corrections and roughly 100 renewals. At an assumed 12 minutes to read and record one certificate by hand, that is about 26 hours of careful reading on one project, before any time spent chasing subs who do not answer. Multiply by the number of projects you run at once and the cost of the insurance step becomes clear.
A storage-only tool would have shown all 24 subs as compliant on day one, because each one uploaded a certificate with a future date. That is the gap a buyer should test for.
Questions to ask in a construction compliance software demo
Bring three of your own certificates to every demo: one that passes, one with a missing endorsement and one with a low umbrella. Then ask:
- Does the tool read each policy line on the certificate, or only store the file and one date?
- Can I set different requirements by trade, by project and for a single sub?
- Does it check the endorsement pages, or only the ADDL INSD and SUBR WVD columns?
- Can I enter the date coverage is needed through for each project, and does it flag policies that end before it?
- Who sends renewal requests, and does the sub need an account to upload?
- Do subs pay anything to join or upload?
- Can I export every check to Excel or CSV for an owner audit or my own insurer?
- Is pricing published, and what does it cost at my number of subs?
A vendor that answers the first four with a clear yes on your own certificates has a real insurance check. For a longer scorecard, use our subcontractor compliance checklist.
How to add the insurance check without replacing your system
Most GCs already run a project management suite and do not want another place for project data. You do not have to choose. Keep inspections, payroll and document control where they are, and run certificates through a tool built to read them.
- Next to your project management suite. Subs upload through a request link, the certificate is checked against the subcontract requirement, and the result goes back to the team that approves payment. If you run Procore, our page on COI tracking for Procore shows how teams split the work.
- Next to a prequalification network. Use the network the owner requires for safety, and certificate tracking for every sub that is not in it.
- Through the API. Larger GCs post certificates from their own portal and read the result back as JSON on the Pro and Enterprise plans.
Insurance is not the only compliance area where a specialist tool beats a general one. A builder whose sales team buys homeowner leads, for example, faces separate consent rules on calls and texts, and a tool that stores proof of each lead's consent handles that better than a CRM note. The principle is the same: match the tool to the risk.
What COISoftware does on a construction project
COISoftware is the insurance part of construction compliance, built for general contractors and the owners who hire them. It reads each subcontractor certificate from a PDF, scan or phone photo: named insured, insurers, policy numbers, dates, limits, and the additional insured and subrogation columns. You set requirements once for the whole account, a project, a trade or a single sub, and each certificate comes back as a pass or a list of exactly what is short. Projects carry the date coverage is needed through, so a policy that ends early is flagged.
You can request certificates from one sub or a whole trade list with a secure upload link, and subs upload without an account or a fee. Before each policy expires, you and the sub get emails at 60, 30 and 15 days. Every check exports to Excel or CSV. Pricing is published on the COI tracking pricing page: Starter is $49 a month, or $24 a month billed yearly, and you can try the check on 10 documents before you pay. General contractors with many active projects usually read COI tracking for general contractors next.
Construction compliance software FAQ
What does construction compliance software do?
It tracks whether a project and its subcontractors meet the rules that apply: safety inspections, certified payroll on public work, licenses, permits and insurance. Most products specialize in one or two of these. Check which jobs a tool really does before comparing prices, because a strong inspection app may only store certificates of insurance.
Does construction compliance software check subcontractor insurance?
Some tools do, many only store the certificate. A real check reads each policy line, compares limits and endorsements with the subcontract, tracks each policy's own expiration and flags coverage ending before the project. Test it with three of your own certificates, including one that should fail.
What insurance should a general contractor require from subcontractors?
Typically general liability with per-project aggregate, auto, workers comp at statutory limits and an umbrella sized to the trade, with the GC and owner as additional insured for ongoing and completed operations, waiver of subrogation and primary and noncontributory wording. Your owner contract sets the floor, as the ACORD certificate only evidences what the policies say.
How much does construction compliance software cost?
Prices range widely because the products do different jobs. Suites and prequalification networks are often quoted, and some networks charge subs to join. Certificate tracking with COISoftware starts at $49 a month, or $24 a month billed yearly, and subs never pay to upload.
Upload one subcontractor certificate on the contractor compliance software page to see what the check finds on yours.
Stop tracking COIs by hand
COISoftware reads every certificate of insurance, checks coverage and endorsements against your requirements, and flags expirations automatically. Test it on your own certificate, no account needed.